MCX Connector Series

MCX connectors conform to the European CECC 22220 spec and were introduced in the 1980’s. While the MCX uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug is .140 inches, which is 30% smaller than the SMB. This series provides designers with options where weight and physical space are limited. MCX provides broadband capability though 6 GHz with a snap-on connector design. A range of connectors are available , including printed circuit board and cable connectors.

Product Links


Features & Benefits

  • Broadband performance with low reflection DC to 6 GHz. Low cost combined with high quality.
  • Quick connect/disconnect snap-on mating reduces installation time.
  • Accommodates a wide range of miniature RG flexible coaxial cables, including semi-rigid cable. This provides customer flexibility in their design and manufacturing.


Applications

  • Automotive
  • GPS
  • PC/LAN
  • WLAN
  • Base Stations
  • Head End Equipment
  • Radios
  • Wireless/Networks Antenna
  • Components
  • Instrumentation
  • Telecom

 

50 Ω MCX Specifications


Electrical
Impedance 50 Ω
Frequency Range 0-6 GHz
Voltage Rating 335 VRMS
Dielectric Withstanding Voltage 1,000 volts
VSWR Straight connectors: 1.00 @ 2.5 GHz
Right angle connectors: 1.10 @ 2.5 GHz
Contact Resistance Center contact: 5 mΩ ; Outer contact: 1.0 m Ω
Insulation Resistance 5,000 M Ω minimum
Insertion Loss 0.10 dB @ 1 GHz

Mechanical
Mating Snap-on coupling per CECC 22220
Braid/Jacket Cable Affixment Hex crimp
Center Conductor Cable Affixment Solder
Contact Captivation All types unless noted otherwise
Engagement Forces Engagement: 4.5 lbs (20N) maximum
Disengagement: 2.3 lbs (10N) minimum
Connector Durability 500 mating cycles minimum

Material
Male Contact Brass per QQB-626
Female Contact Beryllium copper per QQC-530, heat-treated per MIL-H-7199
Contact Plating 30 u" Gold
Body, Metal Parts Brass per QQB-626
Body/Metal Parts Finish Nickel or Gold
Insulator PTFE
Gasket Silicone rubber
Crimp Ferrule Seamless copper tubing alloy
Ferrule Finish Nickel or Gold

Environmental
Temperature Range - 65°C to +165°C
Thermal Shock MIL-STD-202 method 107, test condition B (except high temperatures @ 200°C
Shock MIL-STD-202 method 213, snap-on, test condition B
Vibration MIL-STD-202 method 204, snap-on, test condition B
Corrosion MIL-STD-202 method 101, test condition B. 5% salt solution

Note: These characteristics are typical but may not apply to all connectors.


75 Ω MCX Specifications


Electrical
Impedance 75Ω
Frequency Range 0-6 GHz
Voltage Rating 170 VRMS
Dielectric Withstanding Voltage 500 volts
VSWR Straight connectors: 1.06 @ 2.5 GHz
Right angle connectors: 1.08 @ 2.5 GHz
Contact Resistance Center contact: 5 mΩ ; Outer contact: 2.5 mΩ
Insulation Resistance 10,000 MΩ minimum
Insertion Loss 0.10 dB @ 1 GHz

Mechancial
Mating Snap-on coupling per CECC 22220
Braid/Jacket Cable Affixment Hex crimp
Center Conductor Cable Affixment Solder
Contact Captivation All types unless noted otherwise
Engagement Forces Engagement: 4.5 lbs (20N) maximum
Disengagement: 2.3 lbs (10N) minimum
Connector Durability 500 mating cycles minimum

Material
Male Contact Brass per QQB-626
Female Contact Beryllium copper per QQC-530, heat-treated per MIL-H-7199
Contact Plating 30 u" Gold
Body, Metal Parts Brass per QQB-626
Body/Metal Parts Finish Brass per QQB-626/Nickel or Gold
Insulator PTFE
Gasket Silicone rubber
Crimp Ferrule Seamless copper tubing alloy
Ferrule Finish Nickel or Gold

Environmental
Temperature Range - 65°C to +165°C
Thermal Shock MIL-STD-202 method 107, test condition B (except high temperatures @ 200°C
Shock MIL-STD-202 method 213, snap-on, test condition B
Vibration MIL-STD-202 method 204, snap-on, test condition B
Corrosion MIL-STD-202 method 101, test condition B. 5% salt solution

Note: These characteristics are typical but may not apply to all connectors.