|
|
 |
 |
|
|
|
|
MCX connectors conform to the European CECC 22220 spec and were introduced
in the 1980’s. While the MCX uses identical inner contact and
insulator dimensions as the SMB, the outer diameter of the plug is
.140 inches, which is 30% smaller than the SMB. This series provides
designers with options where weight and physical space are limited.
MCX provides broadband capability though 6 GHz with a snap-on connector
design. A range of connectors are available , including printed circuit
board and cable connectors.
 |
Broadband performance
with low reflection DC to 6 GHz. Low cost combined with high
quality. |
|
|
Quick connect/disconnect
snap-on mating reduces installation time. |
|
|
Accommodates a wide
range of miniature RG flexible coaxial cables, including semi-rigid
cable. This provides customer flexibility in their design and
manufacturing. |
|
Automotive |
|
Base Station |
|
Components |
|
GPS |
|
Head End Equipment |
|
Instrumentation |
|
PC/LAN |
|
Radios |
|
Telecom |
|
WLAN |
|
Wireless/Networks Antenna |
|
|
|
| Impedance |
50 Ω |
| Frequency Range |
0-6 GHz |
| Voltage Rating |
335 VRMS |
| Dielectric Withstanding Voltage |
1,000 volts |
| VSWR |
Straight connectors: 1.00 @ 2.5 GHz
Right angle connectors: 1.10 @ 2.5 GHz |
| Contact Resistance |
Center contact: 5 mΩ ; Outer
contact: 1.0 m Ω |
| Insulation Resistance |
5,000 M Ω minimum |
| Insertion Loss |
0.10 dB @ 1 GHz |
|
| Mating |
Snap-on coupling per CECC 22220 |
| Braid/Jacket Cable Affixment |
Hex crimp |
| Center Conductor Cable Affixment |
Solder |
| Contact Captivation |
All types unless noted otherwise |
| Engagement Forces |
Engagement: 4.5 lbs (20N) maximum
Disengagement: 2.3 lbs (10N) minimum
|
| Connector Durability |
500 mating cycles minimum |
|
| Male Contact |
Brass per QQB-626 |
| Female Contact |
Beryllium copper per QQC-530, heat-treated per MIL-H-7199 |
| Contact Plating |
30 u" Gold |
| Body, Metal Parts |
Brass per QQB-626 |
| Body/Metal Parts Finish |
Nickel or Gold |
| Insulator |
PTFE |
| Gasket |
Silicone rubber |
| Crimp Ferrule |
Seamless copper tubing alloy |
| Ferrule Finish |
Nickel or Gold |
|
| Temperature Range |
- 65°C to +165°C |
| Thermal Shock |
MIL-STD-202 method 107, test condition B (except high temperatures
@ 200°C |
| Shock |
MIL-STD-202 method 213, snap-on, test condition B |
| Vibration |
MIL-STD-202 method 204, snap-on, test condition B |
| Corrosion |
MIL-STD-202 method 101, test condition B. 5% salt solution |
Note: These characteristics are typical but may not apply to
all connectors.
|
| Impedance |
75Ω |
| Frequency Range |
0-6 GHz |
| Voltage Rating |
170 VRMS |
| Dielectric Withstanding Voltage |
500 volts |
| VSWR |
Straight connectors: 1.06 @ 2.5 GHz
Right angle connectors: 1.08 @ 2.5 GHz
|
| Contact Resistance |
Center contact: 5 mΩ ; Outer
contact: 2.5 mΩ |
| Insulation Resistance |
10,000 MΩ minimum |
| Insertion Loss |
0.10 dB @ 1 GHz |
|
| Mating |
Snap-on coupling per CECC 22220 |
| Braid/Jacket Cable Affixment |
Hex crimp |
| Center Conductor Cable Affixment |
Solder |
| Contact Captivation |
All types unless noted otherwise |
| Engagement Forces |
Engagement: 4.5 lbs (20N) maximum
Disengagement: 2.3 lbs (10N) minimum
|
| Connector Durability |
500 mating cycles minimum |
|
| Male Contact |
Brass per QQB-626 |
| Female Contact |
Beryllium copper per QQC-530, heat-treated per MIL-H-7199 |
| Contact Plating |
30 u" Gold |
| Body, Metal Parts |
Brass per QQB-626 |
| Body/Metal Parts Finish |
Brass per QQB-626/Nickel or Gold |
| Insulator |
PTFE |
| Gasket |
Silicone rubber |
| Crimp Ferrule |
Seamless copper tubing alloy |
| Ferrule Finish |
Nickel or Gold |
|
| Temperature Range |
- 65°C to +165°C |
| Thermal Shock |
MIL-STD-202 method 107, test condition B (except high temperatures
@ 200°C |
| Shock |
MIL-STD-202 method 213, snap-on, test condition B |
| Vibration |
MIL-STD-202 method 204, snap-on, test condition B |
| Corrosion |
MIL-STD-202 method 101, test condition B. 5% salt solution |
Note: These characteristics are typical but may not apply to
all connectors.
 |
|
 |
|
