|
| Impedance |
50 Ω |
| Frequency Range |
0-4 GHZ with low reflection; usable to 10.0 GHz
|
| Voltage Rating |
Sea level: 335 volts
70,000 ft: 85 volts
|
| Dielectric Withstanding Voltage (max.) |
750 VRMS RG-196
1000 VRMS for RG-188 type
|
| VSWR
|
RG-196/U series
Straight connector, 1.30 + .04 f (GHz)
Right angle connector, 1.45 + .06 f (GHz)
RG-188/U series
Straight connector, 1.25 + .04 f (GHz)
Right angle connector, 1.35 + .06 f (GHz) |
| Contact Resistance |
Center contact:
initial 6.0 mΩ
after environ. 8.0 mΩ
Outer contact:
initial 1.0 mΩ
after environ. 1.5 mΩ
Braid to body:
initial 1.0 mΩ
after environ. N/A
|
| Insulation Resistance |
1,000 MΩ minimum |
| Insertion Loss |
Straight connectors:
0.30 dB @ 1.5 GHz
Right angle connectors:
0.60 dB @ 1.5 GHz
|
| RF Leakage |
-55 dB minimum @ 2-3 GHz |
|
| Mating |
50 Ohm screw-on coupling
per MIL-STD-348
|
| Mating Torque |
Recommended: 2-3" lbs.
Maximum: 6.6" lbs.
80-110 N.cm
|
| Connector Affixment to Cable |
Braid and Jacket: hex. crimp |
| Cable Affixment to Center Contact |
Solder |
| Contact Captivation |
All types, except noted otherwise |
| Cable Retention |
Equal to breaking strength of cable employed.
|
| Connector Durability |
500 mating and unmating cycles min. |
|
| Bodies |
Brass per QQB-626 or zinc per ASTM B86-71, as specified, nickel or gold plated as listed |
| Center Contacts |
Female: beryllium copper, gold plated.
Male: brass or beryllium copper, gold plated |
| Outer Contact |
Nickel or gold plated as listed |
| Crimp Ferrules |
Annealed copper alloys |
| Insulator |
TFE |
|
| Temperature Range |
- 65°C to +165°C |
| Thermal Shock |
MIL-STD-202 method 107 condition C |
| Vibration |
MIL-STD-202 method 204 condition D |
| Shock |
MIL-STD-202 method 213 condition C |
| Corrosion |
MIL-STD-202 method 101 condition B |
The SMC name derives from SubMiniature C (the third subminiature design). The SMC design was developed in the 1960's. SMC has threaded coupling with 10-32 threads.
Available in 50 & 75 Ohm impedance
